Boult Y1 Pro wireless earbuds to your device, follow these simple steps. These earbuds feature "Blink & Pair" technology,
which makes the initial connection very quick.
Quick Setup Guide
Turn on Bluetooth: On your smartphone, tablet, or laptop, go to Settings and ensure Bluetooth is turned ON.
Power On the Earbuds:
* Auto: Simply open the charging case and remove the earbuds. They will power on automatically.
* Manual: If they are already out, tap and hold the Multifunction Button (MFB) on both buds for 3 seconds.
* Enter Pairing Mode: Once removed from the case, the LED lights on the earbuds will start flashing, indicating they are in pairing mode.
* On your device’s Bluetooth menu, tap "Scan" or "Search for new devices."
* Look for the name "Boult Audio Airbass" or "Boult Audio Airbass Y1".
* Tap the name to pair. You will hear a voice prompt saying "Connected."
Advanced Features
* **Mono Mode (Single Earbud): You can use either the left or right earbud alone. Just leave one in the charging case and pair the other normally.
Dual Device Connectivity:
* Pair the earbuds with Device A and then turn off Bluetooth on that device.
* Pair the earbuds with Device B.
* Once connected to Device B, turn Bluetooth back on for Device A. The earbuds should now be connected to both.
Troubleshooting (Resetting Your Earbuds)
If only one earbud is working or they aren't appearing in your Bluetooth list, follow these steps to reset them:
Forget Device: Delete the "Boult Audio Airbass" record from your phone's Bluetooth settings and turn Bluetooth off.
* Reset Command: Take both earbuds out of the case. Tap both the Left and Right earbuds 5 times simultaneously.
* Confirmation: You will hear a "DU" prompt voice, which means the pairing history is cleared.
* Reconnect: Place them back in the case, take them out again, and repeat the "Quick Setup" steps above.
> Pro Tip: If the earbuds don't turn on immediately, charge them for at least 10 minutes. A 10-minute charge provides roughly 120 minutes of playtime.Boult Y1 Pro